微型给料机驱动器

  In addition to being used as a conveyor for small batches of bulk materials or powders, AViTEQ micro feeders are often used to receive small, regular-shaped bulk materials from containers in large batches, and to complete tasks such as counting and arranging. AViTEQ's electromagnetic drives for micro feeders produced in Germany stand for today's world-leading technological excellence.

Features & Benefits

• High production capacity relative to compact form factor;
• Reliable continuous operation and maintenance-free;
• The load change has no effect on the conveying speed;
• The drive is suitable for all EC guidelines;
• There are special explosion-proof versions that can be used in hazardous areas;
• It is also suitable for 60Hz and other power grids.

Construct features

The micro feeder adopts the principle of double mass resonance, and its drive part contains components that generate vibrations, such as electromagnets, leaf spring groups, etc. The amplitude (double amplitude) generated by the work causes the material to be conveyed to be thrown slightly and theoretically produces a certain conveying speed, in addition, the actual conveying capacity is affected by the size of the conveying cross-section, the density of the material and other factors. When a micro feeder is used as a small parts conveyor, it is generally necessary to bolt a conveyor trough or conveyor track on the top of the micro feeder drive, so it is easy to disassemble and replace. The optimal design structure of the small feeder and the characteristics of its double-mass vibrating system ensure the stability of its conveying, regardless of the size of the material load. The microfeeder drive is supported by rubber pads, and vibrations are virtually impossible to transmit to the surrounding environment.

Drive selection

  When selecting the right micro feeder drive, the customer must have a clear idea of the weight of the conveyor (also known as the working body) that will be mounted on the drive, and this weight must not exceed the allowable operating weight range for each drive.

Construction

• Standard groove of stainless steel 1.4301, electropolished, open groove design, rectangular cross-section, open blanking at the end;
• The bending and reinforcement of the conveyor structure is one of the prerequisites for the normal operation of the equipment

Accessories

• Standard hopper (stainless steel material optional);
• Height-adjustable stand
• Vibtronic-S controller (flow rate can be adjusted linearly from almost 0 to 100%);